Name Xlooper8
Created At 2020-11-02 8:01pm
Submitted By Menno0
Type blue.orchestra.BlueSynthBuilder


Idea of Xlooper8 is to use up to 8 samples and play them in together so that it feels like one big, complicated cluster.
It is a way to get colors in the clusters by combining more than just 1 sample.
Samples can be muted and unmuted while playing, for example by setting their respective Automation Lines 'mute sample X'.

Xlooper8, where X stands for crossfade time of the looping.
Turns stereo and mono samples into mono output, but can individually be panned in order to create one dense sonic structure.
Or you can choose the autopanning.

There is a report function to find out if certain samples are not loaded or invalid.

Sometimes a sample module stays silent; it has to do when loop direction is set to 'forward and backwards', due to the in and out fade time the loop gets out of the available sample length.

In Midi Pitch mode, Midi C4 = normal pitch of sample
In Frequency mode, frequency note 8.00 = normal pitch of sample

note example:
i2 0 0.8 60 1.0 ; P4 = midi value, P5 = amplitude, P6 = sample
i2 0 0.2 261.625565 1.0 ; P4 = frequency, P5 = amplitude, P6 = sample


see the help balloon when hovering over the controllers in the instrument. Help can be turned off by pressing the 'I' button next to the play bar.


version 1.3, November 2020
- added filter
- added envelopes

version 1.2, October 2020
- added BSB information comments
- changed P4, P5 UDO

version 1.1, June 2020
- added comments on controllers and description
- renamed ALs
- revamped sample choice system
- added Comments

version1, November 2019
- 2 types of ADSR