Name PucketteStereo
Created At 2020-07-25 7:00pm
Submitted By Menno0


This is a stereoizer method from Miller Puckette.
In all its simplicity, the result is that frequency bands will be panned left and right alternately.
The size of the frequency bands are determined by the delay time like this: 1000/Bw = Dt. E.g. a delay time of 5 ms gives alternating frequency bands every 200 Hz.
It is also mono compatible, if you collapse the stereo track to mono, the effect will cancel itself out.


ON/OFF - bypass
delay - delay the signal a few ms
amount - mix direct signal and delayed signal


version 1.02, July 2020
- added BSB information comments

version 1.01, May 2020
- added comments on controllers

version 1.0, May 2020
- initial version by Menno Knevel (Original code idea from Miller Puckette)