RingXtended

DESCRIPTION: RingXtended is an effect that uses 2 methods for "carrying" the incoming signal (modulator): the Julian Parker ringmodulation (implementation in a UDO by Steven Yi) and the "usual" multiplication with a wave. I call it Xtended because i wanted several ways to ringmodulate and "mangle" the incoming signal. CONTROLLERS: ON/OFF - bypass ringmethod - Dropdown List to choose Julian Parker (more distortion) or Simple Multiplication method waveform - sine, saw, square, pulse wave or soundfile wave DC offset - can give extar effect sometime by moving the offset of the signal filter - simple lowpass filter phase - gives mono signals some stereo depth wet/dry - gain of effect/direct signal fine/coarse frequency - set fine/coarse frequency of carrier wave Soundfile pitch - set pitch of soundfile Soundfile start sample - start position in soundfile Soundfile loop start - just that Soundfile loop end - just that --- version 1.42, july 2020 - added BSB information comments version 1.41, May 2020 - added comments on controllers version 1.4 beta, April 2019 - spatialize not to 1 but .95 (because 0 = 1) - stereo when stereo soundfile is added version 1.3, February 2019 - added on/off button version 1.2, February 2019 - stereo version - added phaseknob for right channel to spatialize a mono sound version 1.1, February 2018 - added warning when no or invalid impulse sound is used - if no or incorrect impulse, then the effect is bypassed version 1, november 2017 - initial version by Menno Knevel - uses 4 waveforms to carry the incoming signal: sine, saw, square, pulse and soundfile - the soundfile modulation option is done by a looping soundfile with pitch control - a lowpass filter for the carrier signal to filter out some of the harmonics - option to mix dry/wet signal - 2 faders for optimizing the frequency of sine, saw, square or pulse wave - offset option to adjust the amount of sidebands