ftConvXtended

DESCRIPTION: This effect is based on the ftconv opcode example from the FLOSS manual. It gives you full control over the Impulse Response (IR). I call this ftConvXtended because some extra effects are added to, well, the effect. Note that using a big sample as an impulse will be heavy on CPU. CONTROLLERS: ON/OFF - bypass File Selector - import an impulse response length/skip/volume - controls the length of the IR, skips into the IR and gain of IR reverse - reverses the IR blur/blur2 - 2 methods of randomizing the IR values a bit partisionsize - the size in samples of each partition of the impulse file delay direct signal - direct signal is delayed in time Early Reflection - The effect is delayed in time mix direct/effect - mix direct signal with effect Equalizer - on/off for equalizer section Boost high - switch to boost treble and reduce bass high - set frequency and gain for highest frequencies mid/bass - gain for fixed mid and bass frequency gain --- version 1.22, July 2020 - added BSB information comments version 1.21, May 2020 - added comments on controllers version 1.2, April 2019 - corrected error in Reverse, Blur and Blur2 - removed partitionsize (leftover from PConvXtended) version 1.1, February 2018 - added warning when no or invalid impulse sound is used - if no or incorrect impulse, then the effect is bypassed version 1.0, September 2017 - initial version by Menno Knevel - latest GUI (Blue 2.7.0 or greater) - equalizer with on/off switch - high boost filter to compensate treble loss when convolving - Early Reflection (ER), as well as the dry signal can be moved in time - reverse option for the Impulse - blur and blur2 option - option to change the length of the Impulse - option to skip some beginning of the Impulse