Browse BlueShare Catalog

DESCRIPTION: Mixer-channel-strip with 3 eq's. The X axis of the XY controller represents frequencies from low to high, the Y axis is the Q (feedback). CONTROLLERS: ON/OFF - bypass frequency - center frequency in peaking mode, corner frequency in shelving mode. gain - amount of boost or cut. A value less than 1 is a cut. A value greater than 1 is a boost. A value of 1 is a flat response. Q - Quality of the filter Dropdown List - low, high, bandpass, unity gain bandpass, notch, allpass and peak phase - invert phase of signal gain - total gain of effect pan - balance of left and right output signal --- version 1.0, Januari 2023 - Initial release

DESCRIPTION: Mixer-channel-strip with 3 eq's. CONTROLLERS: ON/OFF - bypass frequency - center frequency in peaking mode, corner frequency in shelving mode. gain - amount of boost or cut. A value less than 1 is a cut. A value greater than 1 is a boost. A value of 1 is a flat response. Q - Quality of the filter Dropdown List - bypass, Peaking, Low Shelving or High Shelving phase - invert phase of signal gain - total gain of effect pan - balance of left and right output signal --- version 1.0, Januari 2023 - Initial release by Author: Atte André Jensen (atte.dk)

DESCRIPTION: a 10-band EQ equalizer, using the UDO from Steven Yi: https://github.com/kunstmusik/libsyi/blob/master/audaciouseq.udo that, in turn, is a Csound UDO implementation of Audacious' EQ: https://github.com/audacious-media-player/audacious/blob/master/src/libaudcore/equalizer.cc CONTROLLERS: please check the help balloons, that can be viewed when hoovering overthe BSB elements. --- version 1.0, October 2021 - initial version by Menno Knevel

DESCRIPTION: 4 simple equalizer sections, each with their own frequency range. Uses the opcode eqfil, a 2nd order tunable equalisation filter based on Regalia and Mitra design. The amplitude response for this filter will be flat (=1) for kgain=1. With kgain bigger than 1, there will be a peak at the centre frequency. CONTROLLERS: please check the help balloons, that can be viewed when hoovering overthe BSB elements. --- version 1.0, October 2021 - initial version by Menno Knevel

this plugin has been made with 3rd party code and makes use of the Csound jsfx opcodes, that can be downloaded and installed from: https://github.com/csound-plugins/csound-plugins. These Csound plugins are created by moguillansky. JS effects can be downloaded from: https://stash.reaper.fm/tag/JS-Effects Set path to where your "4BandEQ" JS effect is located. DESCRIPTION: 4 band equalizer. CONTROLLERS: ON/OFF - bypass File Selector - select loser/4BandEQ effect from Reaper directory Low, MId, High Mid, High - frequency band Frequency - set center frequency for EQ Output - output gain --- version 1.01, May 2020 - added comments on controllers version 1.0, September 2019 - initial version by Menno Knevel

a wrapper of ladspa plugin 4262 called ZamGEQ31, created by Damien Zammit. Licensed under GPL v2+. plugin has mono input, mono output. The dssi opcodes are wrapping the ladspa plugin so it can be used as an effect in Blue. The PATH for the ladspa plugins on my Linux systemm is /usr/lib/ladspa. Be sure to set the right PATH if you run OSX or Windows. DESCRIPTION: 31 band mono graphic equaliser, good for eq of live spaces, removing unwanted noise from a track etc. CONTROLLERS: ON/OFF - bypass File Selector - select ladspa effect ZamGEQ31-ladspa.so 32Hz...20801Hz - small frequency bands --- version 1.01, May 2020 - added comments on controllers version 1.0, June 2019 - initial version by Menno Knevel

Author: Atte André Jensen (atte.dk), 2008 Mixer channel strip with 5 parametric eq's all capable of peak, hi shelve, and lo shelve, phase inverter, pan and gain. Changelog: 1.0 * Initial release

Enter in a short description of your effect.

EQ via pareq opcode.