Browse BlueShare Catalog

DESCRIPTION: Stretcher is a sampler for mono and stereo samples. It is capable of stretching the sample in realtime. Or plays them in reverse. Attention: by activating the filter, also the filter envelope drawings become available. In Midi Pitch mode, Midi C4 = normal pitch of sample In Frequency mode, frequency note 8.00 = normal pitch of sample Also, real values can be used. note example: i2 0 0.8 60 1.0 ; P4 = midi value, P5 = amplitude i2 0 0.2 261.625565 1.0 ; P4 = frequency, P5 = amplitude i2 0 0.2 1 1.0 ; P4 = real value, P5 = amplitude CONTROLLERS: see the help balloon when hovering over the controllers in the instrument. Help can be turned off by pressing the 'I' button next to the play bar. --- version 2, February 2023 - initial version

DESCRIPTION: XlooperSolo is a sampler for mono and stereo samples. It can loop at any arbirary points, the loop points can be changed while playing. A fade time should is a guarantee (most of the times) for clickless loops. Attention: by activating the filter, also the filter envelope drawings become available. In Midi Pitch mode, Midi C4 = normal pitch of sample In Frequency mode, frequency note 8.00 = normal pitch of sample note example: i2 0 0.8 60 1.0 ; P4 = midi value, P5 = amplitude i2 0 0.2 261.625565 1.0 ; P4 = frequency, P5 = amplitude CONTROLLERS: see the help balloon when hovering over the controllers in the instrument. Help can be turned off by pressing the 'I' button next to the play bar. --- version 1.2, July 2020 - changed filters section - filter now has Key Follow and Amp Follow option version 1.1, June 2020 - new Vibrato UDO - score format real/midi switch. In midi, accepts 'in-between' note values - better names for ALs - added jitter for amplitude, filter and pitch version 1.0, November 2019 - variable amplitude can create some tremolo effects - ADSR with variable speed - on/off for ADSR

DESCRIPTION: Idea of XlooperSeq is to use a maximum of samples and play them in series or parallel so that it feels like one complicated cluster. Samples can be played simultaneously also, if you set the notes start at the same start time. XlooperSeq, where X stands for crossfade time of the looping and reminds of the XlooperSolo. Turns stereo and mono samples into mono output, but can individually be panned in order to create one dense sonic structure. There is a report function that can be turned on or off to find out if certain samples are loaded all right or invalid. Samples can be muted and unmuted while playing, using their Automation Lines 'mute sample X'. Sometimes a sample module stays silent; it has to do when loop direction is set to 'forward and backwards', due to the in and out fade time the loop gets out of the sample length. CONTROLLERS: Sample x 8: mute - mute this sample start in sample - skip time in sample looprange begin/end - set loop points for begin and end pitch - pitch of sample report - switch to find out if certain samples are loaded all right or invalid direction - loop forward/backward/back-and-forth volume - gain for each sample dirt - subtle random gain variations pan - position this sample in stereo field Vibrato: vibrato depth - amount of gain of vibrato vibrato speed - speed of vibrato Global: ADSR: ADSR ON - switch on/off for envelope generator ADSR attack/decay/sustain/release - set a-d-s-r ADSR speed - retrigger ADSR envelope Xfade: looppoints Xfade - set fade time in order to avoid clicks in loop for all samples looppoints dirt - small variations in loop fades for all samples autopanning - distribute and move sample across stereo field pan speed - speed of moving across stereo field tuning - total tuning of XlooperSeq score format - how to read p4, p4: as real values, midi notes or autodetection L/R - output gain Left/Right channel SCORE EXAMPLE: real value: freq amp sample i1 0 2 100 1 4 midi note: note veloc sample i1 0 2 60 100 4 --- version 1.1, June 2020 - added comments on controllers and description - renamed ALs - revamped sample choice system - added Comments version1, November 2019 - 2 types of ADSR

DESCRIPTION: Idea of Xlooper8 is to use up to 8 samples and play them in together so that it feels like one big, complicated cluster. It is a way to get colors in the clusters by combining more than just 1 sample. Samples can be muted and unmuted while playing, for example by setting their respective Automation Lines 'mute sample X'. Xlooper8, where X stands for crossfade time of the looping. Turns stereo and mono samples into mono output, but can individually be panned in order to create one dense sonic structure. Or you can choose the autopanning. There is a report function to find out if certain samples are not loaded or invalid. Sometimes a sample module stays silent; it has to do when loop direction is set to 'forward and backwards', due to the in and out fade time the loop gets out of the available sample length. In Midi Pitch mode, Midi C4 = normal pitch of sample In Frequency mode, frequency note 8.00 = normal pitch of sample note example: i2 0 0.8 60 1.0 ; P4 = midi value, P5 = amplitude, P6 = sample i2 0 0.2 261.625565 1.0 ; P4 = frequency, P5 = amplitude, P6 = sample CONTROLLERS: see the help balloon when hovering over the controllers in the instrument. Help can be turned off by pressing the 'I' button next to the play bar. --- version 1.3, November 2020 - added filter - added envelopes version 1.2, October 2020 - added BSB information comments - changed P4, P5 UDO version 1.1, June 2020 - added comments on controllers and description - renamed ALs - revamped sample choice system - added Comments version1, November 2019 - 2 types of ADSR

DESCRIPTION: Cycloop can be positioned in between the sampler and the granulator, as it has some aspects of both of them. Cycloop can be seen as an effect, as transformation is done on the signal. On the other hand, the direct signal can be mixed in and together they can sound as one instrument. The instrument takes in the sample and loops it. By retriggering the overlaps and other features like pitch and reading forward/backwards, interesting and evolving textures can be created. The number of overlaps gives the sound an echoic quality that reminds of the granulators. Attention: by activating the filter, also the filter envelope drawings become available. CONTROLLERS: see the help balloon when hovering over the controllers in the instrument. Help can be turned off by pressing the 'I' button next to the play bar. SCORE EXAMPLE: option 1, real values: frequency amplitude i1 0 2 261.625565 1.0 option 2, Midi pitch: pitch amplitude i1 0 3 60 1.0 --- version 1.2, October 2020 - big filter changes - added BSB information comments - changed P4 freq/midi pitch version 1.1, September 2020 - changes: filter - added mix direct/instr version 1.0, June 2020 - initial version