PucketteStereo true 2 2 if (<PucketteStereoON> == 1) then ain = (ain1+ain2)*.5 ; be sure it is mono kdelt = <PucketteStereo_delaytime> adelt interp kdelt ; convert to a-rate kamt = <PucketteStereo_amount> adel vdelayx ain, adelt*0.001, 0.1, 4 ; delay the signal a few ms aout1 = ain+(adel*kamt) ; mix direct and delayed signal aout2 = ain-(adel*kamt) else aout1 = ain1 aout2 = ain2 endif DESCRIPTION: This is a stereoizer method from Miller Puckette. In all its simplicity, the result is that frequency bands will be panned left and right alternately. The size of the frequency bands are determined by the delay time like this: 1000/Bw = Dt. E.g. a delay time of 5 ms gives alternating frequency bands every 200 Hz. It is also mono compatible, if you collapse the stereo track to mono, the effect will cancel itself out. CONTROLLERS: ON/OFF - bypass delay - delay the signal a few ms amount - mix direct signal and delayed signal --- version 1.02, July 2020 - added BSB information comments version 1.01, May 2020 - added comments on controllers version 1.0, May 2020 - initial version by Menno Knevel (Original code idea from Miller Puckette) 10 10 DOT true 0 0 Group 0x00000033 0x000000ff 0xffffffff true 20 20 10 10 Group 0x4d8080ff 0x000000ff 0xffffffff false 20 20 PucketteStereo_amount 70 20 mix direct signal and delayed signal true 0.0 1.0 0.01 0.63 60 true false 60 10 amount System Regular 12.0 PucketteStereo_delaytime 10 10 delay the signal a few ms true 0.0 20.0 5.0 40 true true delay true System Regular 12.0 PucketteStereoON 0 0 bypass true true true