DESCRIPTION:
The Screamer effect is designed to add frequency band limited distortion to the incoming signal.
Resonance can be set to emphasize the cuttoff frequency.
Result is a 'screaming' sound added to a quiet or dull source, to provide 'a body'.
SIGNAL IN ---> FILTER WITH Q ---> DISTORTION ---> SIGNAL OUT
CONTROLLERS:
ON/OFF - bypass
cutoff - filter cutoff frequency
Q - filter Quality value
power - the amount of the shaping effect applied to the input; equal to the power that the input signal is raised
low/band/hi - gain for lowpass, bandpass and highpass filters
mix - mix direct signal with effect
---
version 1.02, July 2020
- added BSB information comments
version 1.01, May 2020
- added comments on controllers
version 1.0, Octobre 2019
- initial version
|